User manual

SimDriftCO Note: this switch should be a on-off-(on) type toggle switch
with the momentary side used for the warning reset and the
latching side used for drift cut off.
SimDriftCOOn Refers to the upper throw of the drift cut off/warning reset
switch. In the real ICP, this switch is a (on)-off-on
configuration, i.e. momentary to one side which in this case
is the warn reset throw. This command places the switch in
the ON position. The pitch ladder and flight path marker are
centered in azimuth in the HUD. This command only
operates if realistic avionics are selected.
SimDriftCOOff Refers to the upper throw of the drift cut off/warning reset
switch. In the real ICP, this switch is a (on)-off-on
configuration, i.e. momentary to one side which in this case
is the warn reset throw. This command places the switch in
the NORM position. The pitch ladder and flight path marker
are displayed normally in the HUD. This command only
operates if realistic avionics are selected.
SimCATSwitch
SimCATI Refers to the STORES CONFIG switch in the landing gear
panel. This command places the switch in the CAT I
position. This command only operates if realistic avionics
are selected.
SimCATIII Refers to the STORES CONFIG switch in the landing gear
panel. This command places the switch in the CAT III
position. This command only operates if realistic avionics
are selected.
SimRegen SP3 command.
OTWTrackExternal
ToggleDisplacementCam
WinAmpNextTrack
WinAmpPreviousTrack
WinAmpStopPlayback
WinAmpStartPlayback
WinAmpTogglePlayback
WinAmpVolumeUp
144