POWER AMPLIFIER OWNER’S MANUAL
POWER AMPLIFIER OWNER’S MANUAL ENGLISH Introduction CONGRATULATIONS... HOW TO USE THIS MANUAL on your purchase of a new MTX Audio Thunder Amplifier! MTX has long been the industry leader in mobile enclosures and speakers, and we have reached new heights with the development of the new MTX Thunder amplifiers. You couldn’t have chosen a more reliable, powerful, or better performing amplifier.
POWER AMPLIFIER OWNER’S MANUAL Installation Any deviation from the connection specifications recommended may cause serious damage to the amplifier, speakers and/or vehicle electrical system. Please double-check the connection before turning the system on. 1. Disconnect the vehicle’s negative battery connection. 2. Place your Thunder amplifier at the predetermined mounting location. Using a felt pen, mark the exact position of the mounting holes on the mounting surface. Set the amplifier aside.
POWER AMPLIFIER OWNER’S MANUAL 1. Gain Controls – These controls are used to match the input sensitivity of the amplifier to the particular source unit that you are using. The controls are factory set to 1Vrms. Note: The separate gain control for front and rear channels. 2. RCA Input Jacks – These RCA input jacks are for use with source units that have RCA or Line Level Outputs. An independent set 187CA or Linerovidsed for(front and rearstereoA inputs. r source unit withal)TjT*-0.
POWER AMPLIFIER OWNER’S MANUAL 1. Fuses - For convenience, all amplifiers utilize ATC type fuses. For continued protection in the event that a fuse blows, replace the fuse only with the same value. Caution: The power fuses on the amp are for protecting the amp against overdrive. To protect the vehicle’s electrical system, an additional fuse is required within 18" of the battery on the 12V+ cable. Output Panel Layout Thunder564 - 25A x 3 Thunder684 - 35A x 3 Thunder1004 - 150 Amps (not supplied) 2.
POWER AMPLIFIER OWNER’S MANUAL Caractéristiques Introduction FRANÇAIS FELICITATIONS... vous félicitant de votre achat d’un nouveau amplificateur MTX Audio Thunder! MTX a été depuis longtemps un leader dans l’industrie d’enclos mobiles et speakers, et nous sommes arrivés à un nouveau sommet avec le développement des nouveaux amplificateurs MTX Thunder. Vous n’auriez pas pu choisir d’amplificateur plus fiable, plus puissant ou meilleur.
POWER AMPLIFIER OWNER’S MANUAL Installation Tout écart par rapport aux préconisations de raccordement risque de faire subir de graves dommages à l’amplificateur, aux hauts-parleurs ou au circuit électrique du véhicule. Vérifier les raccordements avant de mettre le système sous tension. 1. Débranchez la connexion à la borne négative de la batterie du véhicule. 2. Posez l’amplificateur Thunder à l’emplacement de montage prédéterminé.
POWER AMPLIFIER OWNER’S MANUAL 1. Réglages de gain – Ces réglages permettent d’associer la sensibilité d’entrée de l’amplificateur à la source particulière utilisée. Les réglages sont faits en usine sur 1Vrms. Notez que présente des réglages de gain séparés pour les voies avant et arrière. Agencement du panneau d’entrée 2. Prises d’entrée RCA – Elles doivent être utilisées avec des sources présentant des sorties RCA ou à niveau de ligne.
POWER AMPLIFIER OWNER’S MANUAL 1. Fusibles - Pour plus de commodité, tous les amplis Thunder utilisent des fusibles du type ATC. Pour une protection continue, remplacez tout fusible grillé par un fusible du même calibre. Attention - Les fusibles d’alimentation de l’ampli servent à protéger l’ampli en cas de surexcitation. Un fusible supplémentaire monté à 45 cm maximum de la batterie et branché sur le câble 12 V+ sera nécessaire pour protéger le système électrique de votre véhicule.
POWER AMPLIFIER OWNER’S MANUAL Introducción ESPAÑOL CONGRATULACIONES... por su compra del nuevo Amplificador Thunder MTX Audio! MTX viene siendo el líder en la industria de gabinetes de altoparlantes móviles y altoparlantes. Hemos alcanzado nuevos niveles con el desarrollo de los nuevos amplificadores Thunder MTX. Usted no pudo haber elegido un amplificador más seguro, potente y de mejor funcionamiento.
POWER AMPLIFIER OWNER’S MANUAL Instalación Toda desviación de las especificaciones de conexión recomendadas puede causar graves daños al amplificador, a los altavoces y/o al sistema eléctrico del vehículo. Revise dos veces las conexiones antes de encender el sistema 1. Desconecte el cable negativo de la batería. 2. Coloque el amplificador Thunder en el lugar en que lo va a montar. Con un marcador de fieltro, marque la posición exacta de los agujeros de montaje en la superficie de montaje.
POWER AMPLIFIER OWNER’S MANUAL 1. Control de Ganancia – Estos controles se usan para igualar la sensibilidad de entrada del amplificador con la unidad fuente que esta usando. Los controles vienen ajustados de fábrica para 1Vrms. Note que tiene un control de ganancia separado para los canales delanteros y traseros. Diagrama del panel de entrada 2. Conexiones de Entrada RCA – Conexiones de entrada tipo RCA para usar con unidades fuente que tienen RCA o Salidas de Línea Nivelada.
POWER AMPLIFIER OWNER’S MANUAL 1. Fusibles - Por conveniencia, todos los amplificadores utilizan fusibles tipo ATC. Para obtener protección continua en caso de que se funda un fusible, reemplace el fusible solamente con otro del mismo valor. Precaución- Los fusibles en el amplificador son para protegerlo contra una sobrecarga. Para proteger el sistema eléctrico del vehículo se requiere colocar un fusible adicional a una distancia no mayor de 45cm de la batería en el cable de 12V+.
POWER AMPLIFIER OWNER’S MANUAL Technische Informationen Introduction GERMANIC WIR GRATULIEREN! Wir gratulieren Ihnen zum Kauf des neuen MTX Audio Thunder-Verstärkers! MTX ist schon seit langem führend auf dem Gebiet von Mobilgeräten und Lautsprechern, und mit der Entwicklung des neuen MTX Thunder setzen wir diese Tradition fort.
POWER AMPLIFIER OWNER’S MANUAL Installation Einstellen der Verstärkungsregler Jegliche Abweichung von den empfohlenen technischen Anschlussdaten kann erhebliche Schäden am Verstärker, an den Lautsprechern und/oder am elektrischen System des Fahrzeugs verursachen. Bitte überprüfen Sie die Verbindung vor dem Einschalten des Systems. 1. Drehen Sie die Verstärkungsregler auf dem Verstärker ganz aus. 1. Trennen Sie das Minuskabel der Fahrzeugbatterie. 2.
POWER AMPLIFIER OWNER’S MANUAL 1. Verstärkungsregelung – Diese Kontrollen werden eingesetzt, um die Eingangsempfindlichkeit des Verstärkers an das verwendete Quellgerät anzupassen. Die Kontrollen sind von der Fabrik auf 1Vrms voreingestellt. Bitte beachten Sie, dass eine separate Verstärkungsregelung für die vorderen und hinteren Kanäle hat. Eingangskonsolen-Layout 2. RCA Eingangsbuchsen – Die RCA Eingangsbuchsen sind für den Gebrauch mit Quellgeräten, die RCA oder Leitungspegel-Ausgangsignale haben.
POWER AMPLIFIER OWNER’S MANUAL 1. Sicherung: Alle Verstärker verwenden ATC-Sicherungen. Durchgebrannte Sicherungen sollten zu Ihrem Schutz durch gleiche Sicherungen mit demselben Wert ersetzt werden.Vorsicht - Die Sicherungen am Verstärker dienen zum Schutz des Verstärkers gegen Überlastung. Zum Schutz des elektrischen Systems des Fahrzeugs ist eine zusätzliche Sicherung am 12V+ Kabel maximal 50 cm von der Batterie entfernt erforderlich.
POWER AMPLIFIER OWNER’S MANUAL Warranty NOTES All MTX Audio Thunder Amplifiers purchased in the United States from an authorized MTX dealer are guaranteed against defects in material and workmanship for a period of three years from the date purchased by the end user if the product is installed by an authorized MTX dealer, and one year if installed by the consumer. This warranty is limited to the original retail purchaser of the product.