HTB1 Home Theater Loudspeaker System 1 Mitek Plaza Winslow, IL 61089 815-367-3000 800-225-5689 21A6582
INTRODUCTION Congratulations on your purchase of MTX Loudspeakers. Your new speakers represent the latest technologies in loudspeaker design and manufacturing. They will provide outstanding performance and years of listening enjoyment. Please take time to read through this manual thoroughly to insure you get maximum performance out of your new loudspeakers.
SPECIFICATIONS HTB1 Satellite/Center Channel LEFT FRONT Driver Compliment CENTER FRONT RIGHT FRONT Midrange- 3” shielded with paper cone, rubber surround Tweeter- 1/2" Balanced dome tweeter Frequency Response: 150Hz - 20kHz Impedance: 8 ohms nominal 45 Power Handling: 75 watts RMS / 150 watts peak music HTB1 SUBWOOFER Recommended Amplifier Power: 20-75 watts RMS Sensitivity: 85dB@2.83V/1M Weight: LEFT REAR RIGHT REAR LISTENING AREA Satellite- 1.8 lbs. Center Channel- 3.
1) Power Switch: This two position switch controls the power status of the subwoofer. Off: Turns the unit off. On: Turns the unit on regardless of whether a signal is present or not. 2) Subwoofer crossover: This rotary control adjusts a variable low pass filter to set the upper frequency at which the output of the subwoofer begins to roll-off. Continuously variable from 50Hz to 150 Hz, it matches the upper frequency characteristics of the subwoofer to the low frequency response of the main stereo speakers.
