21A2692 FIRST CLASS STAMP HERE MODEL 510CM 4545 E BASELINE RD PHOENIX AZ 85040-6400 WATER RESISTANT IN CEILING LOUDSPEAKER OWNERS MANUAL
CONGRATULATIONS W ARRANTY We appreciate your choice of MTX Blueprint Series In-Ceiling Loudspeakers. Properly installed and operated, MTX In-Ceiling Loudspeakers should provide years of worry-free listening pleasure. It’s important that you follow each step in this guide carefully to insure proper installation. If you have any questions regarding MTX In-Ceiling Loudspeakers, please call us at 1-800-223-5266.
OTHER BLUEPRINT SERIES PRODUCTS FROM MTX MTX offers a wide assortment of audio components. Ranging from in-wall speakers to amplifiers to accessories. Each component is value engineered and must meet strict quality control standards before it becomes part of the MTX product line. Listed below you will find a sampling of MTX components available from your authorized Blueprint Series dealer.
STEP 1 STEP 4 Using a stud finder (available at low cost at most hardware stores) or other accurate method, locate center point between two joists and mark. Using template provided, trace hole pattern on surface of ceiling. Attach loudspeaker wires to speaker terminals, observing correct polarity, and position speaker frame up into cutout. Be careful not to pinch wires in the process. STEP 2 STEP 5 Using a sabre saw, keyhole saw or very sharp utility knife, cut hole in wall, following traced pattern.
