MODEL 512C/ MODEL 612C and MODEL 812C OWNER'S MANUAL 1 Mitek Plaza Winslow, IL 61089 815-367-3000 800-225-5689 21A6529
CONGRATULATIONS MTX WARRANTY INFORMATION We appreciate your choice of MTX In-Ceiling Speakers. Properly installed and operated, MTX In-Ceiling Speakers should provide years of worry-free listening pleasure. It’s important that you follow each step in this guide carefully to insure proper installation.
OTHER PRODUCTS FROM MTX LOUDSPEAKER PLACEMENT In-Wall Loudspeakers MTX In-Ceiling Speakers are designed to work within any interior decorating scheme. They can be installed in virtually any location where flush mounting is possible. To maximize their sound performance however certain guidelines should be followed.
STEP 1 STEP 4 STEP 2 STEP 5 Using a stud finder (available at low cost at most hardware stores) or other accurate method, locate center point between two joists and mark. Using template provided, trace hole pattern on surface of ceiling Using a sabre saw, keyhole saw or very sharp utility knife, cut hole in wall, following traced pattern. Attach loudspeaker wires to speaker terminals, observing correct polarity, and position speaker frame up into cutout. Be careful not to pinch wires in the process.
