Car Amplifier User Manual

Speaker Level

Input

RCA Input

AMPLIFIER

CAR STEREO

(SOURCE UNIT)

REQUIRED INSTALLATION

TOOLS:

For installation options go to mtx.com

Adjustable Wrench • Crimpers • Screw Driver

Utility Knife

Power Drill

Bass Boost

Select Switch

Remote/Power Antenna

Turn-On Wire

Part #: NDM225

Amplifier Input Connections

PAGE 1
/ Amplifier Input Connections Remote/Power Antenna Turn-On Wire AMPLIFIER Bass Boost Select Switch CAR STEREO (SOURCE UNIT) Speaker Level Input RCA Input REQUIRED INSTALLATION TOOLS: Or Power Drill Adjustable Wrench • Crimpers Utility Knife • Screw Driver For installation options go to mtx.
PAGE 2
/ Amplifier Output Connections AMPLIFIER Ground To Metal Of Vehicle Connect to Car Stereo Remote/Power Antenna Turn-On Wire Grommet Disconnect Battery Negative (-) Cable Prior to Installing Amplifier Remove Paint from Metal Minimum Wire Size: Power: 10 AWG. Ground: 10 AWG. For installation options go to mtx.