Operator`s manual

B-10 701333-004
Programming Notes
Note 6: If the host wants to request the second buffer, the request must be the next
command following the request for the first buffer of an acknowledgment.
However, it is not required that the host request the second buffer of an
acknowledgment.
IPDS Command Codes
The IPDS function sets supported by the 1330 include the following:
• Device Control function set
• Text function set
• Image function set
• Graphics function set
• Bar Code function set
• Overlay function set
• Page Segment function set
• Loaded Font function set
Device Control Function Set Commands
The Device Control function set contains the commands used to set up the page,
communicate device controls, and manage the Acknowledge protocol. The Device Control
function set commands are:
dnammoC edoC noitpircseD
PON306DnoitarepOoN
MTS4E6DledoMdnaepyTesneS
SHS796DetatSemoHteS
KCAFF6DylpeRegdelwonkcA
CCLF96DlortnoCypoCdaoL
PPLD66DnoitisoPegaPdaoL
DPLFC6DrotpircseDegaPdaoL
PBFA6DegaPnigeB
PEFB6DegaPdnE
DNED56DdnE
HOXF86DetatSemoHredrOetucexE
AOX336DetatSynAredrOetucexE