Operator`s manual

701333-004 4-5
Configuring the 1330 in 3270 Mode
The Configuration Options
The chart on Page 4-3 provides you with a list of the configuration options for the 1330
in 3270 mode.
This section defines the options in each menu.
100 Page Format
The following options define the printer’s page format.
101 – Left Margin
Configuration Option 101 enables you to specify a left margin value for LU3 mode. This
value is the first possible print position. Valid values are 1 through 20. The default is 1.
Note: Use this configuration option to adjust the left margin value in LU3 mode only.
For LU1 operations, use Configuration Option 412 to change the leftmost
printable position or first printable position. Note that Option 412 settings are
effective in all print modes.
Note that specifying a left margin value greater than 1 effectively decreases the number
of characters you can specify as a line length. For example, at 10 characters per inch
(CPI), 132 is the maximum print position (MPP) on the print line. If you specify a left
margin value of 15, the print line length will be a maximum of 118 characters (at 10
CPI).
See the chart below for the MPP that corresponds to each CPI selection.
PPM IPC
23101
85121
89151
0227.61
5221.71
46202
To specify a left margin value, follow the configuration procedure that begins on Page 4-1.
When you have made your selection, press Save to activate your changes.