Operator`s manual

701333-004 4-13
Configuring the 1330 in 3270 Mode
300 Compatibility
The following options define the printer’s compatibility.
301 – Carriage Return (CR) at MPP + 1
Configuration Option 301 allows you to choose whether the printer will do a carriage
return (CR) after the maximum print position (MPP) of a print line has been exceeded.
noitpO eciohC gninaeM
103
)oN(0
no1noitisopotdaehtnirpehtsevom1+PPMtaRC
rucconacgnitnirprevotahtos,enilemaseht
)seY(1
no1noitisopotdaehtnirpehtsevom1+PPMtaRC
)tluafed(eniltxeneht
To specify your choice, follow the configuration procedure that begins on Page 4-1.
Enter your choice (0 or 1) and press Save.
302 – New Line (NL) at MPP + 1
Use Configuration Option 302 to specify whether the print head will move one new line
(NL) or two new lines after the maximum print position (MPP) of a print line has been
exceeded.
noitpO eciohC gninaeM
203
)oN(0
no1noitisopotdaehtnirpehtsevom1+PPMtaLN
eniltxeneht
)seY(1
no1noitisopotdaehtnirpehtsevom1+PPMtaLN
)tluafed(eniltxenehtretfaenileht
To specify your choice, follow the configuration procedure that begins on Page 4-1.
Enter your choice (0 or 1) and press Save.
303 – Null Suppression
Use Configuration Option 303 to specify how the printer will handle null characters.
This option is valid for LU3 mode only.
noitpO eciohC gninaeM
303
)oN(0sllunfoenileritnerofdeefenilseoD
)seY(1
foenileritnerofdegnahcnusniamernoitisoptnirP
)tluafed(sllun
To specify your choice, follow the configuration procedure that begins on Page 4-1.
Enter your choice (0 or 1) and press Save.