Operator`s manual

4-26 701333-004
Configuring the 1330 in 3270 Mode
502 – Buffer Size
Configuration Option 502 lets you select the effective size of the display screen from
these options:
noitpO eciohC gninaeM
205
1)tluafed(neercsyalpsidetyb-0291
2neercsyalpsidetyb-0652
3neercsyalpsidetyb-0443
4neercsyalpsidetyb-4653
To select the screen size, follow the configuration procedure that begins on Page 4-1. You
can select a different screen size by pressing the appropriate number key (1, 2, 3, or 4), or
you can keep the current size by pressing Save.
503 – 2124 Escape Character
Configuration Option 503 enables you to select an escape character to use in escape sequences
for formatting and printing bar codes and optical character recognition fonts. Valid values are
000 though 191. 000 is the default, and indicates that no escape character is selected. For a
chart showing all valid escape characters, refer to Figure B-2 in Appendix B of this manual.
Note: The printer must be in 2124 Emulation mode before you can use Option 503.
(Choice 3 for Configuration Option 501 must be enabled.)
To select an escape character, follow the configuration procedure that begins on Page 4-1.
You can enter a different value or you can keep the current value by pressing the Save key.
504 – Early Print Complete
Configuration Option 504 allows you to enable the printer to send an “Order Complete”
message before it has completed printing all the data. The default is Disabled.
noitpO eciohC gninaeM
405
)delbasiD(0
redrO“nadnesotretnirpehtwollatonseoD
)tluafed(atadgnitnirperofebegassem”etelpmoC
)delbanE(1
”etelpmoCredrO“adnesotretnirpehtswollA
neebsahatadfognitnirpehterofebegassem
detelpmoc
To specify your choice, follow the configuration procedure that begins on Page 4-1.
Enter your choice (0 or 1) and press Save.