OWNER’S MANUAL MUSICA SERIES DISTRIBUTED AUDIO CUSTOM SPEAKERS MTX.
Thank you for choosing MTX MUSICA Series speakers for your home audio system. Properly installed and operated, these speakers will provide years of worry-free listening pleasure. KEY FEATURES • • • • • • Polypropylene Woofer with Rubber Surround PEI Balanced Dome Tweeter 6dB Octave Tweeter Crossover Easy to Install Collared Dog Leg Mounting Steel Paintable Grilles Press Fit Grille Reduces Exposed Bezel to 0.
CUTTING THE SPEAKER HOLE Before cutting any speaker holes, it is important to check for electrical wiring, plumbing, conduit, studs, or other obstacles that may exist in the intended installation spot. Remember that the grille and flange are larger than the speaker cut-out. Ensure there is room on all sides of the desired location to accommodate the entire speaker. 1.
RE-ASSEMBLING THE GRILLES The grill can now be re assembled into the speaker baffle. 1. 2. 3. 4. 4 Place the scrim cloth on the inner side of the grille. Take the plastic trim and align the notches with the grille flaps. Push the grille into the trim until it sits flush. Fold over the grille flaps tightly so the grille is locked in place. MTX.
SPECIFICATIONS ICM612 Speaker Type: 2-Way In-Ceiling Tweeter: 14mm Balanced Dome Woofer: 6.5" Polypropylene Impedance: 8Ω Sensitivity: 88dB (2.83V/1M) Frequency Response: 43Hz - 25kHz (-10dB) RMS Power: 50-Watts Dimensions: Diameter 8.98" x 3.60" (Diameter 228mm x 91.5mm) Mounting Depth: 3.27" (83mm) Cut Out: Diameter 7.87" (200mm) LCRM62 Speaker Type: Dual 6.5" LCR Tweeter: 14mm Balanced Dome Woofer: Dual 6.5" Polypropylene Impedance: 8Ω Sensitivity: 88dB (2.
NOTES: 6 MTX.
NOTES: MTX.
© 2015 Mitek Corporation. All rights reserved. MTX is a trademark of Mitek Corporation. Designed and Engineered in the U.S.A. Due to continual product development, all specifications are subject to change without notice. MTX Audio, 4545 East Baseline Rd. Phoenix, AZ 85042 U.S.A. 1-800-225-5689 MTX005338 RevA 10/15 • 21A10474 • AW0015220 8 MTX.
