User manual
Table Of Contents
- 1 2 Revision History
- 2 3.1 Summary
- 3 Product Overview
- 4 4.1 The Nevion SDTI audio concept
- 5 Specifications
- 6 Configuration
- 7 Connections
- 8 LEDs
- 9 FLP4 commands
- 10 11 Product Warranty
- 11 A.1 Materials declaration
- A Materials declaration and recycling information
Specifications 11
AES-VMUX/-SFP User Manual Rev. G
5 Specifications
5.1 Electrical SDTI
Video standard 576/25i ITU-R BT.656
Error detection EDH according to SMPTE RP165
Input cable length Greater than 250m
All other SDI parameters conform to ITU-R BT.656
5.2 Optical SDTI
Optical range depends on the output power of the transmitter and the sensitivity of the receiver
of the next module.
See Nevion SFP datasheet available from support or the Nevion web site.
5.3 AES
Inputs and outputs according to AES3-2003
Physical interface 110 ohm transformer balanced
Minimum sampling frequency 16.5 kHz
Maximum sampling frequency 54.7 kHz
Double sample rates using AES Single channel double sampling frequency mode is supported. i.e. 96kHz Mono
signal using both sub-frames of the AES signal.
AES Outputs switch off completely if there is no signal in the routed timeslot.
5.4 Latencies