Instruction manual

Secondary element (clean every 100 to 150
hours)
When the secondary element (under the
primary element) becomes dirty, wash it with
neutral detergent solution and dry it well. Then
reuse it. (Figures 13, 14)
Be sure to check the fuel line for damaged
or looseness.
Replace the fuel line every 2 years, even if it
does not show any abnormality.
Cleaning the machine body
If you want to clean the machine body using
high-pressure steam, do not spray water
directly into the air cleaner, carburetor, muffler,
or top of the fuel tank. Otherwise engine
problems may occur.
b.
5
6
Secondary element
fig.13
fig.14
16