MIXING MUD HAS NEVER BEEN THIS EASY...
This machine is designed primarily for mixing and distributing bagged concrete and/or mortar products, and is intended for use by contractors, landscapers, fence builders, and residential homeowners in completing professional and DIY projects. Read this information carefully to learn how to operate and maintain your product properly and to avoid injury and product damage. You are responsible for operating the product properly and safely. You may contact MudMixer directly at www.MudMixer.
TABLE OF CONTENTS Safety & Specs.................................................................................................................... 1 Parts & Hardware List.......................................................................................................... 1 Assembly Instructions.......................................................................................................... 2 Assembly Video (via QR code).........................................................................
1 Model MMXR-3221 mudmixer.com (05/2023) MudMixer MMXR-3221 Machine Overview View 1 View 2 1. Open the QR Code reader on your smartphone. 2. Hold your device over the QR Code so it’s clearly visible within your smartphone’s screen. Your phone will automatically scan the codeand prompt you to open a browser window. (It may take a few seconds on some devices. Some QR Code readers may require you to press the button to take a picture of the code.
2 mudmixer.com (05/2023) Model MMXR-3221 MudMixer MMXR-3221 Manual Part Number: MMXR-P316 E L A D J K C Q I F H G Hardware magnified and labeled in inset above DETAILS Overall Length 66.5 in. Overall Width 28.5 in. Overall Height 35 in. Chute Height 16 in. A MudMixer - Body Weight 145 lbs. B MudMixer - Frame Hopper Capacity 120 lbs. C MudMixer - Frame Handle Body Construction 14 Gauge High-Strength Steel D Auger Guard - Chute Frame Construction 1 in.
3 Model MMXR-3221 mudmixer.com (05/2023) MudMixer MMXR-3221 Assembly Instructions • Steps 1 - 3a Tools Needed: 1.) Channel Locks 2.) 5/8” Wrench 3.) 7/8” Wrench STEP 1 STEP 2 Lay (A) MudMixer upside down on provided cardboard cover Lay (G) bushing on mixer base, webbing up STEP 3a STEP 3b Secure (F) base plate to mixer via (Q) large washer, (M) small washer (2), (N) spring, and (O) nut STEP 4 & 5 Visit: mudmixer.
4 mudmixer.
5 Model MMXR-3221 mudmixer.com (05/2023) MudMixer MMXR-3221 Operating Instructions 1. Ensure installation of both Safety Auger Guards (Hopper and Chute). 2. Connect garden hose (Min 40PSI recommended) to T-Valve. 3. Connect the Grounded Power Cable to power. 4. Set the Water Control Dial to desired starting point (35 - 50 recommended for concrete). 5. Flip the Power Switch to “Forward” for 5 seconds to test the water and Auger. 6. Pre-wet the Chute using the Secondary Hose. 7.
6 mudmixer.com (05/2023) Model MMXR-3221 MudMixer MMXR-3221 Maintenance Schedule WARNING - DO NOT CLEAN THE MIXER WHILE IT IS HOOKED TO ELECTRICITY DO NOT SPRAY WATER DIRECTLY ONTO OR INTO THE MOTOR General Cleaning • After using the MudMixer, it is absolutely necessary to clean the unit thoroughly. • We recommend using the MudMixer Secondary Hose and a rag to ensure the unit is free of concrete residue of any kind after the end of each project.
7 Model MMXR-3221 mudmixer.com (05/2023) MudMixer MMXR-3221 Warranty Information The MudMixer® Company promises to repair the MudMixer® product if it is defective in materials or workmanship for the period listed below. One Year for any unit used for any purpose including personal, family, or household use, rental, or commercial. This warranty extends to the original retail purchaser only and commences on the date of the original retail purchase.
REGISTER YOUR MUDMIXER Within 30 days of your purchase, register your product to activate your warranty! Go to mudmixer.com/warranty or scan the QR code below to get started. mudmixer.
