Installation Manual

Mi.Node M Installation Manual
Mueller Systems – Proprietary
Page 6
2. Mi.Node M can be directly mounted to almost any flat surface
by using the holes shown and common screws in most
instances.
3. Vertical orientation of the device is required to maximize RF
performance.
3.3 Wiring
Tools Required: 3M-2Y connectors, splitting tube, and a 3M Crimping Tool
Mi.Node M
Red
Green/White
Black
Translator Register
Red
Green/White
Black
Badger ADE Register
Red
Green
Black
Sensus ECR and ICE Registers
Red
Green
Black
Neptune PRORead, AUTORead, E-Coder Registers
Black
Red
Green
Table 1. Mi.Node M Meter Interconnect
3.4 Verification
Following installation the Mi.Tech Hand-held should be used to verify proper installation
and operation. Please refer to the Mi.Tech manual.
4. Maintenance
There are no user serviceable items within a Mi.Node M. The battery is sealed within the
module and is not replaceable. No cleaning is required.
5. Product Labeling
5.1 Product and FCC/IC Identification
This label is affixed to the face of the Mi.Node M unit. This allows the installer to
easily scan the label with the Mi.Tech handheld computer during the installation
process. This label includes the Date of Manufacture, the Hardware Version and the
Mi.Node M/Serial Number (Node ID) that is used to uniquely address the device and
Assembled in USA. The FCC ID is SM6-MINODE-M.