Owner manual

Mueller, Inc.24 x 24 Carport Instructions

TC-1

Turn holes to the

center

*1'-10⅞"

*1'-8¼"

(4"x14" Square Tube)

Finish Floor

SET COLUMNS

Spacing and elevation of the columns are critical to the proper installation of the Mueller carport. The columns

must be square, plumb and set at the exact dimensions shown on the drawings. Depending on the direction of the

watershed, the high side columns must be 2 5/8” taller than the low side columns to achieve the appropriate pitch.

Particular attention should be paid to direction of the pre-punched holes in the top of the columns as shown in the

framing drawings (Holes in column must face to the center of the carport). Pack a small amount of dirt around

each column to temporarily hold them. Do not apply concrete at this time. Time and care should be taken on column

installation, as this will directly affect the appearance and ease of installation on the rest of the carport.

ALL INSTRUCTIONS MUST BE READ PRIOR TO INSTALLATION