Installation Guide

ELECTRICAL REQUIREMENTS
Ensure that the electrical installation is adequate and in
conformance with all national and local codes and
ordinances.
You must have:
• 120-volt, 60 Hz, AC-only, 12-amp, fused electrical
supply.
We recommend:
• A time-delay fuse or circuit breaker.
• A separate circuit.
Warning! No other appliances or outlets should be
connected to the dishwasher supply circuit.
Connecting the Power cord
• One end of the Power cord is already attached to the
dishwasher. Plug the other end (the plug) into a
grounded 3 prong outlet located on an adjacent wall or
cabinet. The outlet must meet all local codes and
CABINET PREPARATION
Drill a 1
4⁄5
" diameter hole in the cabinet (Figure E)
on the right-hand side or rear of the cabinet. For
wood cabinets, sand the hole until smooth. For
metal cabinets, cover the edge with a grommet.
WARNING! THESE INSTALLATION INSTRUCTIONS ARE INTENDED FOR USE BY QUALIFIED PROFESSIONALS.
Figure E
1
4⁄5
" Dia. Hole (Max)
Openings for electrical lines must be installed in
the marked areas, as shown in Figure E, to avoid
interference with the dishwasher frame or other
components.
ELECTRICAL
SHOCK HAZARD
WARNING
The improper connection of
the equipment grounding
conductor can result in a risk
of electric shock.
6