User's Manual

21
ENTR™ Dead Bolt User Manual
4.1 Mounng the Touchpad Reader
SelectthelocaonwheretheTouchpadReaderwillbe
mounted.
• AachtheTouchpadReaderbaseplatetothewall.
• Use4screwsandscrewanchors,ordoublesided
adhesivestrip.
4.2 Baery Replacement
1.Releaselidscrewandopenthelid.
2.Putinthebaeries(2xAA)according
tothe"+""-"signs.
3.Closethelidandghtenthescrew.
Notes:
• AerinserngthebaeriestheTouchpad
Readerwillturnonautomacally.
• AshortbeepsoundemiedandGreen
[OK]indicaonilluminatedfor2seconds.
Important:DonottouchtheTouchpadduring
theselftestprocedureandunlthelights
areo.
4.2.1 Low baery indicaon
Whenbaeriesneedreplacement,ared
warningsignalwillblinkrapidlyandlongbeep
willsoundduringeverylock/unlockacon.
4. Touchpad Reader