Installation Instructions

TECHNICAL MANUAL GS 4x.10 KNX – ENGLISH
48
13.2.1.7 Multiple operation
Designation
Options
Description
Input is being actuated
Closed
Opened
Definition of function of input either as NO or NC contact.
Max. number of actuations
1…4
Maximum number of actuations (each actuation will use a separate communication object)
Sent value
On
Off
Switchover
Selection of the value to be sent
when reaching the number of
actuations.
Update and send
at actuation
Inactive
Active
If inactive, the input accumulates the actuations within the maximum time (see below) and sends only
the corresponding object, e.g.4-times actuiation object.
If active, all actuations will be transmitted, e.g. 1-time, 2-times, 3-times and 4-times.
Maximum time between two
actuations … in s
0,3 … 10,0 seconds
Definition of time between two actuations, before they are distinguished as separate inputs. Especially
relevant when „Update and send at actuation = inactive”.
Additional object
for long actuation
Inactive
Active
Function disabled.
An additional object for long actuation is enabled.
Long actuation
from … in s
0,3 … 10,0
seconds
If active, definition of when to count the actuation as a „long actuation“ can be done.
Sent value at
long actuation
On
Off
Switchover
Value, which will be sent at long actuation.
Debouncing time
10 to 150 ms
Definition of debouncing time for the input.
Enable object
„disable“
Inactive
Active
Communication object (blocking object) for input is disabled.
Communication object (blocking object) for input is enabled.