Installation Instructions

TECHNICAL MANUAL GS 4x.10 KNX – ENGLISH
10
Number Name Object function C R W T U Objekt size Data type
88
E1 ZZ: Reverse direction
input
C
-
W
-
-
1 Bit
Boolean
88 E1 Send when below threshold input C - W - - 1 Byte counter pulses (0...255)
88 E1 Send when below threshold input C - W - - 2 Bytes 2-Byte unsigned value, pulse
88 E1 Send when below threshold input C - W - - 2 Bytes float value, Temperature (°C)
89 E1 ZZ: Reset input C - W - - 1 Bit Boolean
89 E1 Send when above threshold input C - W - - 1 Byte counter pulses (0...255)
89 E1 Send when above threshold input C - W - - 2 Bytes 2-Byte unsigned value, pulse
89 E1 Send when above threshold input C - W - - 2 Bytes float value, Temperature (°C)
90 E1 ZZ: Stop input C - W - - 1 Bit Boolean
99 E1 Block input C - W - - 1 Bit enable
101 E2 switching sensor output C - - T - 1 Bit switching
101 E2 Alarm sensor output C - - T - 1 Bit 1-Bit, Alarm
101 E2 switching output C - - T - 1 Bit switching
101 E2 Blinds UP/DOWN output C - - T - 1 Bit up/down
101 E2 Switch (event 0) output C - - T - 1 Bit switching
101 E2 Priority (event 0) output C - - T - 2 Bit priority switching
101 E2 1-Byte value (-128...127) (Event 0) output C - - T - 1 Byte 8-Bit unsigned value, counter pulses (0...255)
101 E2 1-Byte value (0...255) (Event 0) output C - - T - 1 Byte counter pulses (0...255)
101 E2 Scene (Event 0) output C - - T - 1 Byte scene control
101 E2 2-Byte value (-32.768...32.767) (Event 0) output C - - T - 2 Bytes 2-Byte signed value, pulses difference
101
E2 2-Byte value (0...65.535) (Event 0)
output
C
-
-
T
-
2 Bytes
2-Byte unsigned value, pulse
101 E2 4-Byte value (-2.147.483.648...2.147.483.647) (Event 0) output C - - T - 4 Bytes 4-Byte signed value, counter pulses
101 E2 4-Byte value (0...4.294.967.295) (Event 0) output C - - T - 4 Bytes 4-Byte unsigned value, counter pulses
101
E2 2-Byte Floating point (Event 0)
output
C
-
-
T
-
2 Bytes
float value, Temperature (°C)
101 E2 Scene output C - - T - 1 Byte scene control
101 E2 switching level 1 output C - - T - 1 Bit switching
101 E2 switching 1 actuation output C - - T - 1 Bit switching
101 E2 HZ: Counter reading 1-Byte-value output C - - T - 1 Byte 8-Bit unsigned value, counter pulses (0...255)
101 E2 HZ: Counter reading 1-Byte-value output C - - T - 1 Byte counter pulses (0...255)
101 E2 HZ: Counter reading 2-Byte-value output C - - T - 2 Bytes 2-Byte signed value, pulses difference
101 E2 HZ: Counter reading 2-Byte-value output C - - T - 2 Bytes 2-Byte unsigned value, pulse
101 E2 HZ: Counter reading 4-Byte-value output C - - T - 4 Bytes 4-Byte signed value, counter pulses
102 E2 dimming output C - - T - 4 Bit 3-Bit controlled, Dimmer step
102 E2 STOP/slat adjustment output C - - T - 1 Bit step
102 E2 switch (Event 1) output C - - T - 1 Bit switching