Installation Instructions

TECHNICAL MANUAL GS 4x.10 KNX – ENGLISH
11
Number Name Object function C R W T U Objekt size Data type
102
E2 priority (Event 1)
output
C
-
-
T
-
2 Bit
priority switching
102 E2 1-Byte value (-128...127) (Event 1) output C - - T - 1 Byte 8-Bit unsigned value, counter pulses (0...255)
102 E2 1-Byte value (0...255) (Event 1) output C - - T - 1 Byte counter pulses (0...255)
102 E2 Scene (Event 1) output C - - T - 1 Byte scene control
102 E2 2-Byte value (-32.768...32.767) (Event 1) output C - - T - 2 Bytes 2-Byte signed value, pulses difference
102 E2 2-Byte value (0...65.535) (Event 1) output C - - T - 2 Bytes 2-Byte unsigned value, pulse
102 E2 4-Byte value (-2.147.483.648...2.147.483.647) (Event 1) output C - - T - 4 Bytes 4-Byte signed value, counter pulses
102 E2 4-Byte value (0...4.294.967.295) (Event 1) output C - - T - 4 Bytes 4-Byte unsigned value, counter pulses
102 E2 2-Byte Floating point (Event 1) output C - - T - 2 Bytes float value, Temperature (°C)
102 E2 switching level 2 output C - - T - 1 Bit switching
102 E2 switching 2 actuation output C - - T - 1 Bit switching
102 E2 ZZ: Counter reading 1-Byte-value output C - - T - 1 Byte 8-Bit unsigned value, counter pulses (0...255)
102 E2 ZZ: Counter reading 1-Byte-value output C - - T - 1 Byte counter pulses (0...255)
102 E2 ZZ: Counter reading 2-Byte-value output C - - T - 2 Bytes 2-Byte signed value, pulses difference
102 E2 ZZ: Counter reading 2-Byte-value output C - - T - 2 Bytes 2-Byte unsigned value, pulse
102 E2 ZZ: Counter reading 4-Byte-value output C - - T - 4 Bytes 4-Byte signed value, counter pulses
103 E2 Start event 0/1 input C - W - - 1 Bit switching
103 E2 End position top input C - W - - 1 Bit Boolean
103 E2 Scene storage display output C - - T - 1 Bit enable
103 E2 Switching level 3 output C - - T - 1 Bit switching
103
E2 Switching 3 actuation
output
C
-
-
T
-
1 Bit
switching
103 E2 HZ: Counter reading request input C - W - - 1 Bit switching
104 E2 End position bottom input C - W - - 1 Bit Boolean
104
E2 Switching level 4
output
C
-
-
T
-
1 Bit
switching
104 E2 Switching 4 actuation output C - - T - 1 Bit switching
104 E2 HZ: Limit value exceeded output C - - T - 1 Bit Boolean
105 E2 Store scene input C - W - - 1 Bit enable
105 E2 Enable save input C - W - - 1 Bit enable
105 E2 switching level 5 output C - - T - 1 Bit switching
105 E2 Switching long actuation output C - - T - 1 Bit switching
106 E2 Level up/down switching input C - W - - 1 Bit switching
106 E2 ZZ: Limit value exceeded output C - - T - 1 Bit Boolean
107 E2 Number actuations input C - W - - 1 Byte counter pulses (0...255)
107 E2 ZZ: Counter reading request input C - W - - 1 Bit switching
108 E2 ZZ: Reverse direction input C - W - - 1 Bit Boolean