Installation Instructions

TECHNICAL MANUAL GS 4x.10 KNX – ENGLISH
12
Number Name Object function C R W T U Objekt size Data type
109
E2 ZZ: reset
input
C
-
W
-
-
1 Bit
Boolean
110 E2 ZZ: Stop input C - W - - 1 Bit Boolean
119 E2 Disable input C - W - - 1 Bit enable
121 E3 switching sensor output C - - T - 1 Bit switching
121 E3 Alarm sensor output C - - T - 1 Bit 1-Bit, Alarm
121 E3 switching output C - - T - 1 Bit switching
121 E3 Blinds UP/DOWN output C - - T - 1 Bit up/down
121 E3 Switch (event 0) output C - - T - 1 Bit switching
121 E3 Priority (event 0) output C - - T - 2 Bit priority switching
121 E3 1-Byte value (-128...127) (Event 0) output C - - T - 1 Byte 8-Bit unsigned value, counter pulses (0...255)
121 E3 1-Byte value (0...255) (Event 0) output C - - T - 1 Byte counter pulses (0...255)
121 E3 Scene (Event 0) output C - - T - 1 Byte scene control
121 E3 2-Byte value (-32.768...32.767) (Event 0) output C - - T - 2 Bytes 2-Byte signed value, pulses difference
121 E3 2-Byte value (0...65.535) (Event 0) output C - - T - 2 Bytes 2-Byte unsigned value, pulse
121 E3 4-Byte value (-2.147.483.648...2.147.483.647) (Event 0) output C - - T - 4 Bytes 4-Byte signed value, counter pulses
121 E3 4-Byte value (0...4.294.967.295) (Event 0) output C - - T - 4 Bytes 4-Byte unsigned value, counter pulses
121 E3 2-Byte Floating point (Event 0) output C - - T - 2 Bytes float value, Temperature (°C)
121 E3 Scene output C - - T - 1 Byte scene control
121 E3 switching level 1 output C - - T - 1 Bit switching
121 E3 switching 1 actuation output C - - T - 1 Bit switching
121
E3 HZ: Counter reading 1-Byte-value
output
C
-
-
T
-
1 Byte
8-Bit unsigned value, counter pulses (0...255)
121 E3 HZ: Counter reading 1-Byte-value output C - - T - 1 Byte counter pulses (0...255)
121 E3 HZ: Counter reading 2-Byte-value output C - - T - 2 Bytes 2-Byte signed value, pulses difference
121
E3 HZ: Counter reading 2-Byte-value
output
C
-
-
T
-
2 Bytes
2-Byte unsigned value, pulse
121 E3 HZ: Counter reading 4-Byte-value output C - - T - 4 Bytes 4-Byte signed value, counter pulses
122 E3 dimming output C - - T - 4 Bit 3-Bit controlled, Dimmer step
122 E3 STOP/slat adjustment output C - - T - 1 Bit step
122 E3 switch (Event 1) output C - - T - 1 Bit switching
122 E3 priority (Event 1) output C - - T - 2 Bit priority switching
122 E3 1-Byte value (-128...127) (Event 1) output C - - T - 1 Byte 8-Bit unsigned value, counter pulses (0...255)
122 E3 1-Byte value (0...255) (Event 1) output C - - T - 1 Byte counter pulses (0...255)
122 E3 Scene (Event 1) output C - - T - 1 Byte scene control
122 E3 2-Byte value (-32.768...32.767) (Event 1) output C - - T - 2 Bytes 2-Byte signed value, pulses difference
122 E3 2-Byte value (0...65.535) (Event 1) output C - - T - 2 Bytes 2-Byte unsigned value, pulse
122 E3 4-Byte value (-2.147.483.648...2.147.483.647) (Event 1) output C - - T - 4 Bytes 4-Byte signed value, counter pulses