Installation Instructions

TECHNICAL MANUAL GS 4x.10 KNX – ENGLISH
19
1. Global Settings
(Picture shows modified parameters)
Designation
Options
Description
Send in operation
Inactive
No function.
Sends „0“
Sends „1“
„In operation“ (0 or 1) will be send in the configured cycle time (see next parameter).
Cycle time [s]
in operation
0 to 65535 seconds
Configuration of interval (in seconds) for transmitting the value „in operation“
Request status
Inactive
No function.
Active
Request status with „0“
Request status with „1“
Request status with „0“ and „1“
Status (in operation) can be requested via communication object “0”.
Status (in operation) can be requested via communication object “1”.
Status (in operation) can be requested via communication object “0” and “1”.
Send delay after bus
voltage recovery …s
2 to 255 seconds
Configuration of time delay (in seconds) before sending “in operation” after a bus voltage
recovery.