Installation Instructions

TECHNICAL MANUAL GS 4x.10 KNX – ENGLISH
43
13.2.1.3 Blind sensor
Designation
Options
Description
Blind operating
function
2-push-button, standard
Reaction at shot
actuation
Stop / slat OPEN
Stop / slat CLOSED
Operating mode with two push buttons for blinds.
Blind stops / slat opens step-by-step.
Blind stops / slat closes step-by-step.
Reaktion at
long actuation
High
Down
Move blinds / shutters up.
Move blinds / shutters down.
Long actuation from
… s
0,3 to 10,0 seconds
If active, definition of when to count the actuation as a „long actuation“ can be done.
2-switch, only move
(roller blind) Reaction at actuation High
Down
Operating mode with two switches for blinds / shutters without slat function.
Move blinds / shutters up.
Move blinds / shutters down.
2-push-button, move
(roller blind) Reaction at actuation High
Down
Operating mode with two push buttons for blinds / shutters without slat function.
Move blinds / shutters up.
Move blinds / shutters down.
2-push-button, only slat
Reaction at actuation Stop/ slat OPEN
Stop/ slat CLOSED
Operating mode with two push buttons for blinds / shutters (only slat function).
Blinds stop / open slat.
Blinds stop / close slat.
„Slat“ telegram
repeated every …s
0,3 to 10,0 seconds
Configuration of repetition time for telegram „slat“.
1-push-button,
short=slat, long=move
Long actuation from
… s
0,3 to 10,0 seconds
Short actuation: STOP / Schrittweise
Long actuation: Fahren AUF/AB
1-push-button,
short=move, long=slat
Long actuation from
… s
0,3 to 10,0 seconds
Kurze actuation: Move UP/DOWN
Lange actuation: STOP/ stepwise
1-push-button,only move
One after another at actuation: UP, STOP, DOWN, STOP.
1-switch, only move
At actuation: move UP/DOWN.
STOP at end of actuation.
Input is being
actuated
closed
opened
Definition of function of input either as NO or NC contact.
Debouncing time
10 to 150 ms
Definition of debouncing time for the input.
Enable object
„disable“
Inactive
Active
Communication object (blocking object) for input is disabled.
Communication object (blocking object) for input is enabled.