Installation Guide

FOR GENERAL & TECHNICAL QUESTIONS: please call MULTI SEAL toll-free at 800-577-3353 or visit www.multiseal.us

8. Unscrew the valve core until it is completely loose and remove it from the stem.

Set this to the side, until you are ready to reinstall the core.

CAUTION: Note any remaining air in the tire will be released.

9. After allowing the tire to deflate, push the bottle sealant tube onto the

open valve stem, thereby connecting the bottle and tube to the valve stem.

Once you have ensured a good connection, hold the bottle upside down,

and gradually squeeze the bottle until the recommended amount of sealant

has gone into the tire.

HINT: By looking at the side of the bottle there is a clear window with a

measurement guide. This allows you to know how much sealant has been

inserted into the tire. A full bottle has 32 oz., ¾ has 24 oz., ½ has 16 oz., and

¼ has 8 oz. – so, every mark equals 8 oz.