- Multi Technology Equipment User Guide Wireless Modem GPRS USB

Chapter 2 – Activation and Installation
Multi-Tech Systems, Inc. MultiModem GPRS USB Wireless Modem User Guide 10
Chapter 2 – Activation and
Installation
Step 1 – Activate Your Wireless Account
Multi-Tech – A Certified National Activation Agent
Multi-Tech Systems, Inc. is a certified national activation agent for Cingular and Sprint wireless. For more
information about available data plans and to purchase and activate a wireless data account, contact Multi-Tech at
888-288-5470.
Pre-Configuration and Activation
Pre-Configured Multi-Tech Products
Each Multi-Tech wireless product has been pre-configured to operate on a wireless network.
Activate Your Wireless Account
Please see the wireless account Activation Notices located on the MultiModem CD. Choose the one for your
wireless network provider and follow the directions to activate your account.
Phone Numbers for the Wireless Modem
Every wireless modem will have its own unique phone number. The phone number may simply be given to you by
your wireless service provider or it may be on the SIM card or both. Wireless provider implementations may vary.
Step 2 – Insert the SIM Card into the Holder
The wireless MultiModem requires a SIM card (Subscriber Identity Module) to operate on a GSM network. To install
the card, do the following:
1. Using your fingernail or a small wedging tool (e.g., a small screwdriver), pry off the SIM cover.
2. Insert the SIM card into the holder.
3. Verify that the SIM card fits into the holder properly and then replace the cover.