- Power Measurement Modem User's Guide

Viewing Real-time Data in Designer ION 7500 / ION 7600 User’s Guide
Page 108 Chapter 4 - Using ION Software
Viewing Real-time Data in Designer
You can view the real-time values of output registers in Designer. This is useful
when you are linking these outputs to other modules. It is recommended that you
use Vista or ION Browser as your main data display application.
To view real-time data of output registers:
1. Click Options > Show Toolbox on the Designer menu.
2. Find the ION module you want, press the Shift key and click the output
register. The following example shows the real-time data for the outputs of the
Clock module in an ION 7600 meter:
Changing Setup Registers with Designer
If you are familiar with the nature of ION architecture and comfortable using
Designer, you can use the application to modify ION modules’ setup registers.
NOTE
It is recommended that you use the Setup Assistant in the ION Setup software to configure an ION
module’s setup registers. The Setup Assistant is a user interface that provides access to the setup registers
for a meter. (Refer to the ION Setup section for more details.)