- Power Measurement Modem User's Guide

ION 7500 / ION 7600 User’s Guide Enabling/Disabling Meter Web Browser Configuration
WebMeter Internal Web Server Feature Technical Note Page 277
Enabling/Disabling Meter Web Browser Configuration
You can enable/disable web browser configuration of the meter with Designer
software or the meter’s front panel. Refer to your meter’s Installation and Basic Setup
manual to learn how to enable/disable web browser configuration of the meter
with the front panel. Refer to the following instructions to learn how to enable/
disable web browser configuration with Designer software.
NOTE
Depending on the meter, web browser configuration of the meter may be enabled by default.
Enabling/disabling web browser configuration of the meter:
The steps are the same for enabling or disabling web browser configuration of the
meter; in step 3 you select either option.
1. Open the meter in Designer and double-click on the Communications Setup
folder. The screen that appears contains shortcuts to several Communications
modules and one Ethernet module.
2. Right-click on the icon in the center of the Ethernet module. The ION Module
Setup screen appears.
3. Double-click the Webserver Config Access setup register and change the value
to “Enabled” or “Disabled.”
4. Click Send and save.