User's Guide

Appendix C – AT Commands
24
AT Command List (continued)
V24 - V25 Commands
+IPR Fixed DTE Rate
+ICF DTE-DCE Character Framing
+IFC DTE-DCE Local Flow Control
&C Set DCD Signal
&D Set DTR Signal
&S Set DSR Signal
O Back to Online Mode
Q Result Code Suppression
V DCE Response Format
Z Default Configuration
&W Save Configuration
&T Auto-Tests
EEcho
&F Restore Factory Settings
&V Display Configuration
I Request Identification Information
SIM Toolkit Commands
+STSF SIM Toolkit Set Facilities
+STIN SIM Toolkit Indication
+STGI SIM Toolkit Get Information
+STCR SIM Toolkit Control Response
+STGR SIM Toolkit Give Response
Specific AT Commands
+CCED Cell Environment Description
+CCED Automatic RxLev Indication
+WIND General Indications
+ADC Analog Digital Converters Measurements
+CMER Mobile Equipment Event Reporting
+WLPR Read Language Preference
+WLPW Write Language Preference
+WIOR Read GPIO Value
+WIOW Write GPIO Value
+WAC Abort Command
+WTONE Play Tone
+WDTMF Play DTMF Tone
+WDWL Downloading
+WVR Voice Rate
+WDR Data Rate
+WHWV Hardware Version
+WDOP Date Of Production
+WSVG Select Voice Gain
+WSTR Status Request
+WSCAN Scan
+WRIM Ring Indicator Mode
+W32K Power saving mode