Installation Manual

PART 2 – Cellular SocketModems Chapter 2 – SocketModem Cell & SocketModem iCell GPRS
Multi-Tech Systems, Inc. Universal Socket Hardware Guide for Developers (S000342M) 58
Technical Specifications
The SocketModem Cell and SocketModem iCell (MTSMC-G2 and MTSMC-G2-V) meet the following specifications:
Category Description
Standards
GPRS Class 10
Frequency Bands
Quad-band GSM/EGPRS 850/900/1800/1900 MHz
Serial/Data Speed
Serial interface supports DTE speeds up to 921.6K
IP interface supports DTE speeds at the fixed rate of 115.2
Packet data up to 85.6K bps
Circuit-switched data (GPRS) up to 14.4K bps transparent and non-transparent
Supports data rates of 921600, 460800, 230400, 115200 bps
Data Format
10 bit Serial Asynchronous
Data Error Correction
MNP2
Data Compression
V.42bis
Weight
1 oz. (28 g)
Size
3.15" x 1.375" (80.010 mm x 34.925 mm)
Operating Temperature
-40° C to +85° C
Storage Temperature
-40 °C to +85°C
Humidity
10% to 90%
Input Power
5VDC
Operating Voltage
Supply Range: VCC
Maximum: 5.5
Voltage at Any Signal Pin
Minimum: GND
Maximum: VCC
Antenna Connector
Surface mount UFL
(one for cellular and one for GPS)
SIM Holder
Standard 1.8V and 3V SIM holder
IP Protocols Supported MTSMC-G2, MTSMC-G2-V
DNS Resolve, FTP Client, LCP, PPP (dial-out),TCP socket, UDP socket, PAP &
CHAP authentication
MTSMC-G2-IP, MTSMC-G2-GP
DNS Client, FTP Client, ICMP (Ping), POP3 Client, SMTP Client, TCP Client &
Server, UDP Client & Server, IP, PPP (dial-out) with PAP & CHAP authentication
M2M Applications MTSMC-G2-IP, MTSMC-G2-GP
Automatic connect/reconnect, device monitor, modem emulation, Ping & TCP keep
alive, wake-up on caller ID, wake-up on ring, GPS tracking (GP model only)
Compliance EMC Compliance
FCC Part 15
EN55022
EN55024
Radio Compliance
FCC Part 22
FCC Part 24
RSS 132
RSS 133
EN 301 511
EN 301 489-1
EN 301 489-7
AS/ACIF S042.1
AS/ACIF S042.3
Safety Compliance
UL 60950-1
cUL 60950-1
IEC 60950-1
AS/NZS 60950-1
Network Compliance
PTCRB
Warranty
Two years
Note: The radio's performance may be affected at the temperature extremes. This is considered normal. The radio is
designed to automatically fallback in class and reduces transmitter power to avoid damage to the radio. There is no single
cause for this function. Rather, it is the result of an interaction of several factors, such as the ambient temperature, the
operating mode and the transmit power.