User Guide
Table Of Contents
- Product Overview
- Pinout
- Design Considerations
- Developer Board and Schematics
- Safety Notices and Warnings
- Labeling Requirements
- Regulatory Statements
- Environmental Notices
- Antennas, Cables, GPS
- Device Overview
- Mechanical Drawing
- Specifications
- Application Notes
- Installing Drivers for Non-UIP HSPA+ Devices
- Using Linux with H5 Devices
- Index
SPECIFICATIONS
Category Description
Safety Compliance UL 60950-1
cUL 60950-16t
EN 60950-1
Network Compliance GCF Certified Module
MTPCIE-H5 DC Electrical Characteristics
Units: Volts
Parameter Minimum Maximum
3.3 Volt Powered 3.0 3.6
Input Low Level 0 0.35
Input High Level 1.5 1.9
Output Low Level 0 0.2
Output High Level 1.6 1.9
Absolute Maximum Rating
Voltage at any signal pin: 0.0V to +1.9V
PCIE Connector Leads
PIN # Name I/O Function Type Notes MTPCIE-H5- MTPCIE- MTPCIE-
V-BW H5 H5-V
1 SDIO_D0 I/O Wi-Fi SDIO_D0 1.8V SDIO can operate no no
up to 25Mhz. The function function
SDIO traces to Host
must be treated
like a bus and the
bus length shall be
as short as
possible.
Recommend
adding series
termination
resistors on all the
SDIO traces.
2 3.3Vaux I 3.3Vaux
3 SDIO_D1 I/O Wi-Fi SDIO_D1 1.8V no no
function function
4 GND Ground
MultiConnect
TM
PCIe MTPCIE-H5/MTPCIE-BW Developer Guide 53