User Guide
Table Of Contents
- Product Overview
- Pinout
- Design Considerations
- Developer Board and Schematics
- Safety Notices and Warnings
- Labeling Requirements
- Regulatory Statements
- Environmental Notices
- Antennas, Cables, GPS
- Device Overview
- Mechanical Drawing
- Specifications
- Application Notes
- Installing Drivers for Non-UIP HSPA+ Devices
- Using Linux with H5 Devices
- Index
PINOUT
Pinout
Multi-Tech Mini PCIe Pinout
Note:
Some modems do not include all the pins shown above. Refer to your model’s Device Guide for model
specific pinout information.
SDIO can operate up to 25Mhz. Treat the SDIO traces to Host like a bus and keep the bus length as short as
possible. Multi-Tech recommends adding series termination resistors on all the SDIO traces.
Pin # Name I/O Function MTPCIE-H5 MTPCIE-H5-V-BW MTPCIE-
BW
1 SDIO_D0 I/O Wi-Fi SDIO_D0 X X
2 3.3Vaux I 3.3Vaux X X X
3 SDIO_D1 I/O Wi-Fi SDIO_D1 X X
4 GND Ground X X X
5 SDIO_D2 I/O Wi-Fi SDIO_D2 X X
6 BT_TXD I Bluetooth Transmit X X
data
7 SDIO_D3 I/O Wi-Fi SDIO_D3 X X
8 BT_RTS I Bluetooth RTS X X
9 GND Ground X X X
10 BT_CTS O Bluetooth CTS X X
11 SDIO_CMD I/O Wi-Fi SDIO_CMD X X
12 BT_RXD O Bluetooth Receive data X X
13 SDIO_CLK I Wi-Fi SDIO_CLK X X
14 BT_EN I Bluetooth enable (low X X
disable)
15 GND Ground X X X
16 GPIO_2 I/O 3G Cellular General X
purpose I/O
17 WLAN_EN I Wi-Fi enable (low X X
disable)
18 GND Ground X X X
19 WLAN_IRQ O Wi-Fi interrupt (low X X
active)
20 3G_ONOFF I 3G Cellular On/Off (low X X
active)
8 MultiConnect
TM
PCIe MTPCIE-H5/MTPCIE-BW Developer Guide