User's Guide
Table Of Contents
- Product Overview
- Safety Warnings
- Cellular Information
- Installing and Using the Router
- Regulatory Information
- Industry Canada and FCC
- FCC and IC Antenna Requirements Toward License Exempt Radio Transmitters (Bluetooth/Wlan)
- Requirements for Cellular Antennas with regard to FCC/IC Compliance
- EMC, Safety, and R&TTE Directive Compliance
- Restriction of the Use of Hazardous Substances (RoHS)
- REACH Statement
- Waste Electrical and Electronic Equipment Statement
- Information on HS/TS Substances According to Chinese Standards
- Information on HS/TS Substances According to Chinese Standards (in Chinese)
PRODUCT OVERVIEW
Product Overview
About MultiConnect rCell 100 Series Router
This guide describes the MultiConnect rCell 100 Series router. The rCell family of routers is carrier approved and
ready-to-deploy. You can use your device to provide secure data communication between many types of devices
that use legacy as well as the latest communication technologies. Some device models support Bluetooth and Wi-Fi
communication to devices with these technologies. Also some device models support GPS. The router has an
integrated cellular modem and includes 10/100BaseT Ethernet and RS-232 serial connectivity. An image of the
device follows:
Items bundled with the device: 1 Taoglas GW.11.A153 Wi-Fi antenna, 2 Laird Hepta-SM MAF94300 antennas,
1 Trimble GPS antenna 66800-52 and 1 Globtek GT-41052-1509 100-240 9V 1.7A power supply.
Documentation
The following table describes additional documentation for your device. The documentation is available on the
Multi-Tech Installation Resources website at www.multitech.com/setup/product.go.
Document Description
User Guide This document. Provides an overview, safety and regulatory
information, schematics and general device information.
AT Commands You can configure the device using the HSPA+ AT Commands. These
commands are documented in the Reference Guide part number
S000528.
MultiConnect
®
rCell 100 Series Router User Guide 5