Network Card User's Manual

ISI Quick Start Guide
16
Configuring your Modems for your Country
Different countries have different requirements for how modems must function.
Therefore, before you use the modems in your ISI card, you must configure them to
match the defaults of the country in which you are using them. Use the Global Wizard
to configure each modem as described below. The Global Wizard configuration utility
works with computers running Windows 2008/Vista/XP/2003/2000.
1. Insert the ISI product CD into the CD-ROM drive. The main splash screen
appears.
2. Click Initial Setup & Country Sel.
3. The Global Wizard page appears. You can select to run the Global Wizard from
the CD or install it on your hard drive. Click on the Install or Run button.
4. The Global Wizard dialog box appears. Click Next.
5. The Global Wizard searches for your modems and identifies them. Click Next.
Select a modem to configure. Click Next.
6. Select the country in which the modem will be used, and then click Next.
7. Review your choice of country. If it is correct, click Next to configure the
modem.
8. When Global Wizard announces that the parameters have been set, click
Finish to exit.
9. Repeat steps 4 through 8 for each modem on the ISI card.