user manual

Index
Multi-Tech Systems, Inc. SocketModem MT5634SMIxx Reference Guide (S000263C) 133
+FPA:- Report Addressing or Password Strings ..........67
+FPI – Local Polling ID String ....................................77
+FPI:- Report Remote ID .............................................66
+FPO – Remote Polling Indication ..............................65
+FPS – Page Transfer Status ........................................82
+FPS – Receive Page Transfer Status ..........................68
+FPW – Addressing & Polling Frames ........................81
+FPW:- Report Addressing or Password Strings..........67
+FRQ – Receive Quality Thresholds............................84
+FSA – Addressing & Polling Frames .........................81
+FSA: ...........................................................................67
+FSP – Request to Poll.................................................78
+FTC:- Report DIS/DCS/DTC Frame Information......65
+FTI\ - Report Remote ID............................................66
D - Originating a Call...................................................61
Class 2.1 Commands
+FCS? – Current Session Results.................................73
+FLI – Local ID String.................................................77
+FNS – Non-standard Frame FIF Octet String.............78
Comma, setting pause time - S8........................................28
Command Execution Mode ..............................................52
Command mode..................................................................5
Command Speed Response command - %S .....................17
Command string..................................................................5
commands and responses..................................................55
Commands and Responses Overview Fax Class 2............55
Communication Standard command - B .............................8
Communications programs .................................................5
Compound Parameters......................................................51
configuration
Global Wizard ............................................................130
remote.........................................................................129
Configuration
Selecting reset configuration command - &W..............14
Control Tone Cadence Reporting command - +VDT=...117
Copy Quality Checking - +FCQ .......................................83
Country Code, Displaying ................................................10
Current Session Parameters - +FIS...................................73
Current Session Results Parameters - +FCS? ...................73
Current Sessions parameters.............................................73
D
Data Bit Order parameters............................................87
Data buffering...................................................................13
Data Calling Tone command -C .......................................16
Data Carrier Detect command ..........................................12
Data Compression Control command - %C......................16
Data Compression Format Conversion - +FDFFC............89
Data mode.....................................................................5, 10
Data Reception - +FDR ....................................................63
Data Reception command.................................................63
Data Set Ready Control command....................................13
Data Terminal Ready Control command ..........................12
Data Transfer Mode..........................................................52
Data Transmission - +FDT ...............................................62
Data Transmission command ...........................................62
DCD Control command - &C...........................................12
DCE Capabilities Parameters............................................72
DCE responses..................................................................64
Diagnostic Information, Displaying..................................10
Dial command - D ..............................................................9
Dial Stored Telephone Number command - DS= ...............9
Dial string modifiers ...........................................................9
Dialing tones - S11 ...........................................................28
Direct Connect Enable command - %H............................17
Display Current Settings command - &V .........................14
Display Service Class Capabilities command -
AT+FCLASS=? ......................................................... 106
Distinctive Ring command - +VDR=............................... 25
Distinctive Ring Report command +VDR= ..................... 18
downstream data rate set S38 ........................................... 29
DSR Control command - &S............................................ 13
DTE Phase C Response Timeout parameters ................... 85
DTE/DCE Interface Rates.............................................. 128
DTMF Detect Detect and Control DTMF command
+FCLASS=8 .............................................................. 106
DTR Control command - &D........................................... 12
DTR Dialing command - $D............................................ 17
E
Echo Command Mode Characters command - E................ 9
Echo Online Data Characters command - F ....................... 9
Enable or Disable Voice Mode Packet Protocol command -
+VPP= ....................................................................... 119
Enable/Disable Distinctive Ring (Ring Cadence Reporting)
command +VDR=...................................................... 116
enables the V.25 calling tone - S35 .................................. 28
Enter Setup Password command - #S......................... 20, 27
Enter Voice Receive State command - +VRX ............... 108
Error control - S36, setting............................................... 28
Error control, setting S48 ................................................. 30
Error Correction Mode Selection command - \N.............. 15
Error Threshold Multiplier parameter .............................. 84
Escape AT Command....................................................... 21
Escape character - S2 ....................................................... 28
Escape sequence................................................................. 5
Escape Sequence
%% - literal % character in AT+FPH .......................... 92
%d - day of month in AT+FPH.................................... 92
%h - hour in AT+FPH ................................................. 92
%I - hour, 24-hr clock, AT+FPH ................................. 92
%j - day of year in AT+FPH........................................ 92
%M - minute in AT+FPH ............................................ 92
%m - month in AT+FPH ............................................. 92
%p - am or pm in AT+FPH.......................................... 92
%P - current page of fax in AT+FPH........................... 92
%r - ID of remote fax machine in AT+FPH................. 92
%s - time seconds expression in AT+FPH................... 92
%t - ID of transmitting fax machine in AT+FPH......... 92
%y - year w/o century in AT+FPH .............................. 92
%Y - year with century in AT+FPH ............................ 92
Escape sequence - %%%ATMTSMODEM ..................... 21
Escape sequence +++AT ................................................ 21
Event Reporting and Masking command - +VEM=....... 117
Example
Answer, Play Greeting, Record Message................... 126
Compression Methods ............................................... 125
Example of Transmission and Reception ......................... 49
Examples of calling/answering table................................ 45
F
Facsimile Connection response ..................................... 64
Fallback............................................................................ 10
Fallback and Fall Forward command - %E ...................... 17
Fax adaptive reception control parameter - +FAR ........... 41
fax answering ................................................................... 34
Fax carrier loss timeout parameter - +FCL ...................... 41
Fax Class 1 and 1.0 auto answer enable command - +FAA
..................................................................................... 37
Fax Class 1 and Fax Class 1.0 Commands Table............. 34
Fax Class 1.0 auto answer enable command - +FAA....... 37
Fax Class 2