Modem User Manual

Index
Multi-Tech Systems, Inc. SocketModem MT5634SMIxx Reference Guide (S000263C) 132
B
Backspace character - S5, setting......................................28
Bad Line Threshold parameter..........................................84
Bell 212A mode..................................................................8
Blacklist command ...........................................................16
Break Control command - \K............................................15
Break Signal .....................................................................15
Buffer Size parameters......................................................92
C
Call Termination with Status - +FHS ..............................69
call waiting .......................................................................23
Call Waiting Enable command - +PCW=.........................23
Callback Attempts command - #CBA.........................19, 26
Callback Delay command - #CBD....................................19
Callback Delay command #CBD......................................26
Callback Enable/Disable command - #CBS......................20
Callback Enable/Disable command #CBS........................27
Callback Failed Attempts Display command - #CBF? .....19
Callback Failed Attempts Display command #CBF?........26
Callback Failed Attempts Reset command - #CBFR..19, 26
Callback Parity command - #CBP ..............................19, 26
callback security
callback attempts..........................................................26
callback delay time.......................................................26
callback failed attempts reset........................................26
callback security reset ..................................................26
enabling and disabling............................................20, 27
failed password attempts ..............................................26
inactivity timer .............................................................26
parity ......................................................................19, 26
passwords ...............................................................19, 26
setup password .............................................................27
Callback Security Reset command - #CBR ......................20
Caller ID ...........................................................................25
Caller ID Selection command - +VCID=..........................25
Capability to Receive - +FCR...........................................79
Carriage return character - S3...........................................28
Carrier loss disconnect time - S10, setting........................28
Cisco Configuration command - %R ................................17
Class .................................................................................93
Class 2 command
+FLNFC – Page Lenght ...............................................89
+FVRFC – Page Width ................................................90
Class 2 commands
+FEA – Phase C Received EOL Alignment.................87
+FREL - Phase C Received EOL Alignment ...............87
Class 2 commands
+FAA - Adaptive Answer ............................................85
+FAXERR – T.30 Session Error Report ......................86
+FBADLINL – Bad Line Threshold Parameter ...........84
+FBADMUL ................................................................84
+FBO – Data Bit Order ................................................87
+FBOR – Data Bit Order..............................................87
+FBUG – Session Message Reporting .........................79
+FCIG – Local Polling ID String .................................77
+FCIG:- Report Remote ID..........................................66
+FCLASS? – Service Class Setting..............................59
+FCON – Fax Connection Response............................64
+FCR – Capability to Receive......................................79
+FCSI:- Report Remote ID ..........................................66
+FDCC= - Modem Capabilities Parameters.................72
+FDIS= - Current Sessions Parameters ........................73
+FDR - Data Reception................................................63
+FDT – Data Transmission ..........................................62
+FDTC: ........................................................................65
+FET:- Post Page Message .......................................... 69
+FHNG:- Call Termination with Status....................... 69
+FK – Session Termination ......................................... 63
+FLCASS=<value> - Service Class Selection............. 60
+FLP – Indicate Document to Poll .............................. 78
+FLPL – Indicate Document to Poll............................ 78
+FMDL? – Request Model ID..................................... 60
+FMFR? – Request Manufacturer ID .......................... 60
+FMINSP – Minimum Phase C Speed ........................ 86
+FMS – Minimum Phase C Speed............................... 86
+FNSC:- Report Non-Standard Negotiation Frames ... 66
+FNSF:- Report Non-Standard Negotiation Frames.... 66
+FNSS:- Report Non-Standard Negotiation Frames.... 66
+FPHCTO - Host Phase C Response Timeout............. 85
+FPOLL – Remote Polling Indication ......................... 65
+FPTS – Page Transfer Status ..................................... 82
+FPTS - Receive Page Transfer Status ........................ 68
+FREV? – Request Revision ID .................................. 61
+FSPL – Request to Poll.............................................. 78
+FTSI:- Report Remote ID .......................................... 66
A – Answer a Call........................................................ 61
Copy Quality Checking+FCQ...................................... 83
D Originate a Call........................................................ 61
Class 2 commands
+FDFFC – Data Compression Format Conversion...... 89
Class 2 commands
+FLO – Fax Flow Control ........................................... 90
Class 2 commands
+FBU – Buffer Size ..................................................... 92
Class 2 Commands
AT+FTD – Set Time & Date ....................................... 91
Class 2 Commands
+FDCS? – Current Session Results ............................. 73
+FLID – Local ID String ............................................. 77
Class 2 Commands
AT+FPH – Page Header Generation............................ 91
Class 2 Commands
+FHT – Report Transmit HDLC Frames..................... 93
Class 2.0/2.1 commands
1+FVRFC – Format Conversion.................................. 88
Class 2.1 commands
- +FDR – Data Reception ............................................ 63
+FAA – Adaptive Answer ........................................... 85
+FAP – Address & Polling Capabilities ...................... 80
+FBU – Session Message Reporting............................ 79
+FCC= - Modem Capabilities Parameters ................... 72
+FCI:- Report Remote ID............................................ 66
+FCLASS= - Service Class Selection.......................... 60
+FCLASS=? – Service Classes Available ................... 59
+FCO – Fax Connection Response.............................. 64
+FCQ – Copy Quality Checking.................................. 83
+FCR – Capability to Receive ..................................... 79
+FCS\ - Report DIS/DCS/DTC Frame Information:.... 65
+FDM – Transition to Data Modem ............................ 64
+FDT – Data Transmission.......................................... 62
+FET – Post Page Message.......................................... 69
+FHS:- Call Termination with Status .......................... 69
+FIP – Initialize Fax Parameters.................................. 63
+FIS\ - Report DIS/DCS/DTC Frame Information:..... 65
+FIS= - Current Sessions Parameters .......................... 73
+FKS – Session Termination ....................................... 63
+FMM?........................................................................ 60
+FMR? – Request Revision ID.................................... 60
+FNC:- Report Non-Standard Negotiation Frames...... 66
+FNF:- Report Non-Standard Negotiation Frames...... 66
+FNR – Negotiation Reporting.................................... 80
+FNS:- Report Non-Standard Negotiation Frames...... 66
+FPA – Addressing & Polling Frames......................... 81