Modem User Manual

2 Installation
16
MultiModemZPX User Guide
Step 5 - Run Add Modem Wizard
1. Place the MT5634ZPX-V92 CD in the CDROM drive and allow time for the CD to spin up. The
MT5634ZPX-V92 AutoRun screen will appear.
2. Click on Start I Control Panel I Phone and Modem Options.
3. In the Phone and Modem Options screen with the Dialing Rules tab active, click on the
Modems tab.
4. Click on the Add button.
5. In the Install New Modem screen, click on Don’t detect my modem; I will select it from a
list. Click Next.
6. In the next Install New Modem screen, click on the Have Disk button.
7. Browse to the location of the CDROM drive, usually CD Drive(D:). The Locate File screen
appears, click on the Look in: down arrow and choose the CDROM drive. Click on zpxisa.inf
file.
8. In the Models window of the Install New Modem screen, click on the MT5634ZPX-V92 option
and click Next.
9. The Select the port(s) you want to install the modem on screen appears. Highlight the COM
port On which ports do you want to install it? This is the COM port that you choose in step 8
in Determine System Resources. Click Next.
10.Windows will display the logo compatibility test screen, click Continue Anyway button.
11.The Modem installation is finished screen appears, click Finish.
Step 6 - Query Modem
1. To be sure the system can access the modem, highlight the MT5634ZPX-V92 in the Modem
window of the Phone and Modem Options screen. Click the Properties button.
2. The MT5634ZPX-V92 Properties screen is displayed, click on the Diagnostics button.
3. In the Modem Information area, click on Query Modem button. The system will pause for a
few seconds while trying to access the modem. The modem will respond to the AT commands
sent by the system.
4. The modem response will be displayed in the Command I Response window of the
MT5634ZPX-V92 Properties screen.