- Multi-Tech User Guide Modem MTASR1-100

RouteFinder MTASR1-100 User Guide
MTASR1-100 48
WEB Browser Management
The RouteFinder can be accessed from anywhere on the connected Internet through its built-in WEB
Browser interface. To enable this function, you must check this option in Other setup. Depending on
the rights of the user (read/write, or read only), it is possible to view the current parameters and
statistics of the RouteFinder as well as configure and download setup changes to the unit.
You can access RouteFinder configuration by typing the IP Address of the unit into the address line
of your web browser.
When the Welcome screen is displayed, click on the word Login to gain access to the RouteFinder.
The Enter Network Password screen is displayed. Enter your User name and Password, then
click on OK to go to the RouteFinder Configuration menu.
Note: The first user to access the RouteFinder will have read/write rights over the unit. All
subsequent users will have read only rights, and therefore, some of the options within the WEB
interface will be inactive (i.e., will not be linked).