User's Manual

Index
Multi-Tech Systems, Inc. SocketModem MT5634SMIxx Reference Guide (S000263C) 136
S37 – Maximum Speed ................................................29
S38 – Downstream Data Rate.......................................29
S4 – Line Feed Character .............................................28
S43 – Testing and Debugging ......................................29
S48 – Error Control ......................................................30
S5 – Backspace Character ............................................28
S6 – Wait Time for Dail Tone......................................28
S7 – Abort Timer..........................................................28
S8 - Comma..................................................................28
S89 - Standby ...............................................................30
S9 - Remote Configuration Escape Character ............129
S9 – Remote Configuration Escape Character..............28
setting ...........................................................................11
Standby mode delay time S89...........................................30
Start Voice Transmission Process command - +VTX.....110
Store Callback Password command - #CBN= ............19, 26
Store Dialing command - &Z – Store Dialing Command.14
Store Setup Password command - #S ...............................27
Store Setup Password command - #S= .............................20
String Parameters..............................................................51
T
T.30 Phase A negotiation responses .................................64
T.30 Phase B negotiation responses .................................65
T.30 Phase C Page Reception responses...........................68
T.30 Phase D post page responses ....................................69
T.30 Procedure Control Parameters ................................82
T.30 Session Error Report - +FAXERR ...........................86
T.30 session parameter frames..........................................65
T.30 Session Parameters..................................................72
T.30 Session Subparameters .............................................74
Tone Dialing command - T...............................................11
Tones - S11, dialing..........................................................28
Transition to Data Modem - +FCON................................64
Transition to Data Modem - +FDM..................................64
Transmit Break command - \B..........................................14
U
Unsolicited Voice Mode Result Codes ...........................122
upstream mode..................................................................23
Upstream V.90 data rates S38...........................................29
V
V.22 mode ..........................................................................8
V.22bis Guard Tone Control command - &G...................12
V.25 Data Calling Tone....................................................16
V.25ter +GMI? .................................................................60
V.34 modulation - S28, enabling ......................................28
V.42 Error Correction.......................................................15
V.42bis data compression .................................................16
V.54 Test commands ........................................................13
V.92 commands
#CBA – Callback Attempts..........................................26
#CBFR – Failed Attempts Reset ..................................26
#CBI – Local Callback Inactivity Timer ......................26
#CBN= - Store Callback Password ..............................26
#CBP - Callback Parity ................................................26
#P – Set 11-Bit Parity...................................................27
#S – Enter Setup Password...........................................27
#S= - Store Setup Password .........................................27
+MS? – Reports Current Options .................................22
+MS= - Modulation Selection ..................................... 22
+MS=? – Reports Supported Options .......................... 22
+PCW= - Call Waiting ................................................ 23
+PIG= - PCM Upstream Ignore................................... 23
+PMH= - Modem on Hold........................................... 23
+PMHF – Modem Hook Flash..................................... 24
+PMHR= - Modem on Hold Initiate............................ 24
+PMHT= - Modem on Hold Timer.............................. 24
+PQC= - Quick Connect.............................................. 25
+VCID= - Caller ID..................................................... 25
+VDR= - Distinctive Ring Report ............................... 25
V.92 commands - #CBD - Callback Delay ...................... 26
V.92 commands - #CBR – Callback Security Reset ........ 26
V.92 commands - #CBS – Callbacl Eneable/Disable....... 27
V.92 mode........................................................................ 22
V.92 Modem Hook Flash command - +PMHF ................ 24
Vertical Resolution Format Conversion - +FLNFC ......... 89
Vertical Resolution Format Conversion - +FVRFC......... 89
Vertical Resolution Format Conversion Parameters... 89, 90
View Numbers in Blacklist command - %B..................... 16
Voice commands
+FCLASS=8 – Detect & Control DTMF................... 106
AT+FCLASS=? – Display Service Class Capabilities106
+FCLASS= - Select Modem Operating Mode........... 105
+VNH=<hook> - Automatic Hang-up Control.......... 107
+FMI? – Report Manufacturer ID.............................. 107
+FMM? – Report Product ID..................................... 107
+FMR? – Report Version Level................................. 107
+FLO=<method> - Select Flow Control Method ...... 107
VIP – Initialize Voice Parameters.............................. 107
+VRX – Enter Voice Receive State ........................... 108
+VTS= - Produce DTMF and Tone Generation......... 108
+VTS=? – Report Frequency Support........................ 109
+VTX – Start Voice Transmission Process................ 110
+VGR= - Set Gain for Received Voice Samples ....... 110
+VGT= - Set Volume for Transmitted Voice Samples
............................................................................... 110
+VIT= - Set DTE/DCE Inactivity Timer ................... 110
+VLS= - Select Analog Source.................................. 111
+VLS=? – Identify Analog Source ............................ 112
+VRA= - Set Ring Back Goes Away Timer.............. 112
+VRN= - Set Ring Back Never Appeared Timer....... 112
+VSD= - Set Silence Detection Sensitivity................ 113
+VSM= - Voice Compression Method ...................... 114
+VSM=? – Report Voice Compression Method ........ 115
+VTD= - Select Default Beep Tone Duration ........... 115
+VDR= - Enable/Disable Distinctive Ring................ 116
+VDT= - Control Tone Cadence Reporting............... 117
+VEM= - Event Reporting & Masking...................... 117
+VEM=? – Report Event Reporting & Masking
Capabilities............................................................ 118
Voice Commands........................................................... 103
Voice Mode Result Codes.............................................. 121
Voice Mode Shielded Codes .......................................... 123
Voice Sample Sessions................................................... 125
W
Wait time for dial tone - S6.............................................. 28
X
XON/XOFF Pacing Control command - &E.................... 12