User's Manual

Chapter 3 – Fax Class 2 Commands
Multi-Tech Systems, Inc. SocketModem MT5634SMIxx Reference Guide (S000263C) 78
Non-standard Frame FIF Octet String
Class 2.1 +FNS
Write syntax: +FNS="< hexadecimal-coded octet string>"
Values: up to 90 octets
Default: Null String
If +FNS is not a Null String, the modem sends the corresponding non-standard
facilities frame. The type of frame is determined by the type of negotiation frame to
be sent: NSF sent with DIS; NSS sent with DCS; NSC sent with DTC.
The modem only delivers the data; the host must determine the content. The first
octet must be the country code (see Recommendation T.35).
Class 2 There is no equivalent parameter in Class 2.
Indicate Document to Poll
Class 2.1 +FLP
Write syntax: +FLP=<value>
Values: 0, 1
Default: 0
+FLP=0 The host has no document to poll.
+FLP=1 The host has a document ready for polling. The modem reports this to the
remote station in the DIS frame. The modem resets this parameter to 0
after a polled document is sent.
Class 2 +FLPL
Write syntax: +FLPL=<value>
Values: 0, 1
Default: 0
The Class 2 parameter is the same as the Class 2.1 parameter except for the name.
Request to Poll
Class 2.1 +FSP
Write syntax: +FSP=<value>
Values: 0, 1
Default: 0
+FSP=0 The host does not want to poll.
+FSP=1 The host can receive a polled document. The modem resets this parameter
to 0 after a polled document is received.
Class 2 +FSPL
Write syntax: +FSPL=<value>
Values: 0, 1
Default: 0
The Class 2 parameter is the same as the Class 2.1 parameter except for the name.