User Guide

Configure Client MultiVOIPs

Deploying the VOIP Network

Deploying the VOIP network involves the VOIP Administrator

developing the VOIP Dialing Directory and deploying the pre-

configured client MultiVOIPs to their remote sites. The remote

site administrators need only connect power to the pre-

configured MultiVOIP, connect it to their Ethernet LAN and

predefined telephone equipment, and then wait for the phone

directory database to be downloaded.

Perform the following procedure to deploy your VOIP network.

VOIP Administrator

1. Create your VOIP Dialing Directory based on your Phone

Directory Database for the numbers to connect the

MultiVOIPs to your VOIP network and the telephone

extension number you need to connect the Voice/Fax

channels. A sample VOIP Dialing Directory is provided

below for your consideration and use.

To call from

Call Process

Dialing

Sequence

VOIP Dialing Directory

2. Send the client MultiVOIPs to their remote sites.