Manual

54
Chapter 7 - Using the MultiVOIP Software
Multi-Tech Systems, Inc. MultiVOIP User Guide
The Station Identification group enables you to assign the entry to a Hunt Group, provide
the IP Address of the MultiVOIP being assigned the phone number, and accept the H.323
industry standard Port number. A Hunt Group is a series of telephone lines organized in such
a way that if the first line is busy the next line is hunted and so on until a free line is found. It
is a set of links which provides a common resource and which is assigned a single hunt
group designation. A user requesting that designation may then be connected to any member
of the Hunt Group.
You can view the details of the current Hunt Group configuration by clicking the Phone
Directory Database’s Hunt button. The current Phone numbers for HUNT GROUP #1 are
displayed.
Select the Hunt Group you wish to view. The Phone no’s window displays the telephone
numbers associated with that Hunt Group and the No. of Entries field displays the running
total of entries.
Note: You can change the name of the Hunt Group by clicking on the entry that you want to
change, editing the change in the Hunt Group name window, and then clicking the Set button.
Click Slave Status on the Phone Directory Database dialog box to view the status of all the
slave units in your VOIP network (Send Status Report to Master must be enabled on the
Slave). The Phone Number of each Slave displays with its IP Address, current line status,
and the description of the phone number.