User Guide

Chapter 5 – RouteFinder Manager
RouteFinder RF500S User Guide 66
Chapter 5 - RouteFinder Manager
RouteFinder Manager is a software program for configuring your RF500S.
1. To run RouteFinder Manager, click on the
RouteFinder Manager icon on your
desktop, or click
Start | Programs | RouteFinder Manager | RouteFinder Manager.
2. The Manager screen displays.
3. The RF500S automatically searches your network for devices available for
configuration and displays them in the
Available Devices list box.
Note: Before using any of the Manager options, you must
select the device you are
attempting to configure from the
Available Devices list. If you need to update the list, click
Refresh Device List. Once the RF500S is configured, you must exit RouteFinder Manager
before using it.
Status - After you have selected a device from the Available Devices list, the Status field
provides the name, IP address, MAC address and Firmware version of your RouteFinder.
Buttons - The buttons in the left column can change the device’s name and password,
save and load settings, upgrade the firmware or run general diagnostics on the device.
The buttons in the right column provide access to advanced configuration options for
General Settings, Port Settings, LAN DHCP Server Options, Router Settings and Filter
Settings. Additional information about all of these options is included in this chapter.