User Guide

Chapter 1 – Introduction
RouteFinder RF500S User Guide 7
RF500S Front Panel
LAN LEDs
Link/ACT Lights when the LAN client is correctly connected to the Ethernet port.
Blinks when the LAN client is correctly connected to the Ethernet port.
100 Lights when the LAN client is connected at 100MB. Off when the LAN client
is connected at 10MB.
FDX/COL Lights when the LAN client is connected as full duplex. Off when the LAN
client is connected as half duplex. Blinks when there are collisions on the
network.
Serial LEDs
Data Blinks when the Serial async port is receiving or transmitting data.
DCD Lights when the Serial async port is properly connected to a remote site.
WAN LEDs
Link Lights when a successful connection to the 10BaseT WAN is established.
RXD Lights when the LAN port is receiving data.
TXD Lights when the LAN port is transmitting data.
Power Lights when power is being supplied to the router.