user manual

Part 3 – AT Commands for Wi-Fi Devices Chapter 11 – General AT Commands for the SocketWireless Wi-Fi
Universal IP AT Commands Reference Guide (Document S000457K) 62
#BOOTMSG – Enable/Disable Boot Message
Description: Enables/disables the boot message.
Syntax: AT#BOOTMSG=<0,1>
AT#BOOTMSG? Read or display the current setting.
Values: 0 - Disable
1 - Enable
Default: 1 Enable
Examples: AT#BOOTMSG?
0
OK
AT#BOOTMSG=1
OK
AT#BOOTMSG?
1
OK
AT#BOOTMSG=0
OK
#WATCHDOG – Enable/Disable Watchdog
Description: Enable/disable Watchdog for the system – reset on HANG.
Note: The module must be reset to put the command into effect.
Syntax: AT#WATCHDOG=<0,1>
AT#WATCHDOG?
Values: 0 - Disable Watchdog
1 - Enable Watchdog
Default Value: 1 Enable Watchdog
Example: AT#WATCHDOG?
1
OK
#WATCHDOGTIMER – Watchdog Timer
Description: Sets the Watchdog timer in milliseconds.
Note: The module must be reset to put the command into effect.
Syntax: AT#WATCHDOGTIMER=<value>
AT#WATCHDOGTIMER? Read or display the current setting.
Values: Maximum milliseconds that can be entered is 7000
Default: 1000ms
Example: AT#WATCHDOGTIMER?
4000
OK