user manual

Part 3 – AT Commands for Wi-Fi Devices Chapter 12 – Telnet AT Commands for the SocketWireless Wi-Fi
Universal IP AT Commands Reference Guide (Document S000457K) 64
#TELNETPASSWORD – Set Telnet Password
Description: Sets Telnet password.
Note: The module must be reset to put the command into effect.
Syntax: AT# TELNETPASSWORD = “<64 char string>”
AT# TELNETPASSWORD? Read or display the current setting (or AT#VTELNET or AT#VALL).
Default: “ ”
Example: AT#TELNETPASSWORD?
admin
OK
Display Command
#VTELNET – View Telnet Settings
Description: Displays all Telnet settings.
Syntax: AT# VTELNET
Example: AT#VTELNET
#TELNET: 0
#TELNETPORT: 23
#TELNETUSER: "admin"
#TELNETPASSWORD: "admin"
OK