user manual

Part 6 – AT Commands for GPS-Enabled Devices Chapter 16 – AT Commands for GPS-Enabled Devices
Universal IP AT Commands Reference Guide (Document S000457K) 94
#GPSGPGLL – Enable/Disable GPGLL Message
Description: This command enables or disables the reporting of NMEA GPGLL messages.
Syntax: AT#GPSGPGLL =<value>
AT#GPSGPGLL? or AT#VGPS or AT#VALL
Values: 0 Disable
1 Enable
Default: 0
Responses: OK
Otherwise ERROR
#GPSGPGSA – Enable/Disable GPGSA Message
Description: This command enables or disables the reporting of NMEA GPGSA messages.
Syntax: AT#GPSGPGSA =<value>
AT#GPSGPGSA? or AT#VGPS or AT#VALL
Values: 0 Disable
1 Enable
Default: 0
Responses: OK
Otherwise ERROR
#GPSGPGSV – Enable/Disable GPGSV Message
Description: This command enables or disables the reporting of NMEA GPGSV messages.
Syntax: AT#GPSGPGSV =<value>
AT#GPSGPGSV? or AT#VGPS or AT#VALL
Values: 0 Disable
1 Enable
Default: 0
Responses: OK
Otherwise ERROR
#GPSGPRMC – Enable/Disable GPRMC Message
Description: This command enables or disables the reporting of NMEA GPRMC messages.
Syntax: AT#GPSGPRMC =<value>
AT#GPSGPRMC? or AT#VGPS or AT#VALL
Values: 0 Disable
1 Enable
Default: 0
Responses: OK
Otherwise ERROR