M Motorized Projection Screen
Installation 1a 2a 2b 1b
Operation 1 2 3 IMPORTANT: PLEASE ROLL UP THE PROJECTION SCREEN AFTER USE
Drop adjustment a 1 counterclockwise adjustment turn shortens the top drop by approximately 1cm b 1 clockwise adjustment turn enlarges the top drop by approximately 1cm
Remote & Wall Receiver Synchronization Please follow the steps below to synchronize your remote control and wall receiver. 1. Disconnect your M Motorized Projection Screen from the electricity power supply. 2. Slightly press the "Down" button on the wall receiver for 5-6 seconds. 3. Connect your M Motorized Projection Screen to the electricity power supply. 4. Slightly press the "Up" button. 5. Press any key of the remote control pointing it at the wall receiver. 6.
