User`s manual

36
4. Basic Operation
4.1 Initial System Starts Up
Operating the unit for the first time or after replacing the car battery. Press button with a
pointed object (such as ballpoint) to set the unit to initial procedure.
NOTE: When some errors occur in the LCD display, you can also press
. button to resume to normal. And it will erase the clock
setting and some memorized functions.
4.2 Turning the Unit ON/OFF
Press button to turn on the unit.
When the unit is on, short press , button, turn off the monitor, press button
again to turn on the monitor.
Long press button to turn off the unit.
4.3 Volume Control
Press button for increase or decrease the sound volume.
4.4 Mute Function
Press Remote Control button shortly to cut down the sound output, and “MUTE” icon
appear in the LCD display. Press it again to restore previous volume level.
4.5 Touch screen Calibrate
f the position of touch occurs warp, you can calibrate by pressing the the “+” cursor . access the
touch screen calibrate mode interface.
Click the icon to access the touch screen calibrate mode interface.
Click the icon “Enter” Setting on the mode interface.
4. Basic Operation