User Manual

Programmable Features Continued
• Answering Machine Silent Transfer-This feature is like Unanswered Call
Silent Transfer except that it is designed for calls of 45 seconds or less.
It should only be activated when you are using an answering machine to
field after-hours calls. When a manual fax or modem call arrives and the
answering machine has answered, the caller will still be able to get to a
destination device by staying on the line after the answering machine
"times out".
If you answer a call and hang up before 45 seconds, The Stick will transfer
the call to the designated device.
Factory preset is "off."
• Silent Transfer Destination-After activating either Silent Transfer feature,
you will want to tell The Stick where to route the call.
The "Destination" program feature gives you the option of routing all after-
hours calls to either the fax or modem.
Factory preset is to the port labeled "FAX".
• Programmable Security Access Codes (SAC's)-Transfer of a call is
executed by dialing the programmed SAC for each voice/data device
connected to The Stick.
SAC's are programmable (using a touch tone phone only) up to 4
characters long-digits 0 through 9 and symbols * Touch Tone Pulse Dial
(star) and # (pound). The Stick will not detect SAC's dialed from "calling"
pulse phones-only from touch-tone phones.
Call transfers dialed by a pulse phone are limited to phones hooked to or
on the same line as The Stick and are limited to transfer to the "FAX" port
only.
The pulse dial SAC for this is fixed at "2" You must also have the "Pulse
Select" feature on if you use a pulse dial phone to transfer a call.
• Pulse Detection-The Pulse Detection feature, when activated, allows The
Stick to detect the factory-preset code "2" and "Call Grab" preset code "9"
when dialed from a pulse dial phone.
The factory preset for this feature is "off."